Cisco TelePresence System 3200, Инструкция по использованию и уходу

Страница: 12 / 246

1-2
Cisco TelePresence System 3200
OL-14521-01
Chapter 1 Overview
Chapter Organization
Chapter 7, “Building the Second Row Table Assembly”
• This chapter describes how to build the second row table and is organized the same as Chapter 2.
Chapter 8, “Assembling the Remaining Cisco TelePresence Elements”
•
This chapter is organized the same as Chapter 2.
•
Each element is described using one or more illustrations. The elements are:
–
Camera assembly —attaches to the center Display structure
–
Front row table leg wiring assembly —wired for power and network connectivity
– Projector assembly —attaches to the underside of the center table segment
–
Codec and Audio/Video Expansion Unit assembly —attach the codecs to each Display
structure and attach the extension unit to the center display structure
–
Speaker assembly —attach to the underside of the Display shelf
–
Projector Screen assembly —attaches to the underside of the Display shelf
–
Cisco Unified IP Phone 7975 —used for initial configuration of the Cisco TelePresence system
and to join meetings
–
Camera Target assembly —used for camera focus and alignment
Chapter 9, “Routing Power and Signal Cables”
• A series of illustrations are used to describe the routing and connection of power and signal cables
for the front row and the display assembly area.
•
Illustrations show you the routing path to take for all cables.
• Illustrations showing cables terminating in a Codec include a close-up of the Codec.
Chapter 10, “First-Time Setup”
• This chapter describes the configuration you perform to set up your Cisco TelePresence System
3200 for the first time.
Chapter 11, “Use & Care Guide”
•
This chapter provides information on maintaining several elements of the
Cisco TelePresence System 3200, including the tabletop and plasma displays.
Chapter 12, “Field-Replaceable Unit Guide”
•
This chapter describes removal and replacement processes for various elements of the
Cisco TelePresence System 3200.
Appendix A: Parts List Sorted by Carton
• This appendix lists all parts included in the individual chapter parts lists, and sorts the list by carton.
Appendix B: Region- and Country-Specific Equipment
•
This appendix lists the part numbers for all region- and country-specific equipment, including table
leg wiring and power cords.
Figure 1-1 View of an Assembled Cisco TelePresence System 3200, Standard Configuration
Step 1 Install and connect the camera assembly. See Step 1 and Step 2 in Chapter 8, “Assembling the
Remaining Cisco TelePresence Elements” to install the camera assembly and Step 14 in Chapter 9,
“Routing Power and Signal Cables” to connect the camera cables.