Replacing the power supply
13
Replacing the power supply
The power supply will be installed when you receive your gateway. To replace the
power supply:
1
Remove the power cable from the unit to disconnect the power.
2
Push the power supply latch to the right and grip the handle firmly. Pull the
power supply to remove it.
3
Insert the replacement power supply so that the latch is at the bottom left.
4
Push the power supply firmly into the unit until the latch engages.
5
Reconnect the power cable.
Figure 3: Replacing the power supply
Only replace the power supply under the guidance of Cisco customer
support.
!
