Removing the T3 DFC
To remove the T3 DFC, follow these steps:
Note
Following these steps are examples of the output from each command.
Step 1
Determine which slot the DFC is in (See
Figure 4-2
and
Figure 4-3
.) by entering the
show chassis command in privileged EXEC mode:
Router# show chassis slot
Figure 4-2 Slot Numbering on the Cisco AS5350 Chassis
Figure 4-3 Slot Numbering on the Cisco AS5400 Chassis
Step 2
Initialize the software busyout procedure by entering the busyout command:
Router#
busyout
slot-number
Step 3
Enter the
show busyout
command to check busyout status for that specific slot:
Содержание T3
Страница 9: ... Cabling Specifications ...
