InstallatIon GuIde
1
Cisco SPA122 ATA Installation Guide
For analog phone or fax extensions
Activating Your Cisco ATA
You will need your activation code to activate your Cisco ATA. The activation code was sent via
email. You can also retrieve it in the 8x8 Account Manager by following these instructions:
1. Go to
www.8x8.com
, click
Sign In
and select
Account Manager
; enter your administrator
username and password.
2. Click
Phone System
from the top navigation bar, select
View All Extensions,
then click
Activate Device
next to the extension you wish to activate.
3. A pop-up screen displays the activation code for the extension.
Note:
If you are activating an Overhead Paging system, follow the special instructions provided
in the pop-up screen.
4. To activate your device for voice or fax service, connect an analog phone (or fax machine with
phone) to the
Phone 1
port on the Cisco ATA. Lift the handset and follow the voice instructions
to enter the activation code. You will hear a message confirming your ATA is activated.
Installing your Cisco SPA122 ATA
Connect your device using the ports on the back panel. You will need either an analog phone or a
fax machine with an analog phone to activate your device using the
Phone 1
port.
Fax Machine
(2nd-Port Fax Plan Only)
Computer or
Laptop
Internet Connection
(Router or Broadband Modem)
Power Adapter
Analog Phone, Fax
or Paging System
• Use the PHONE 1 port to connect an analog phone, analog overhead pager or fax machine with
an RJ-11 telephone cable. (If you purchased a 2nd-Port Fax Plan, connect that fax to the
PHONE 2 port.)
• The
ETHERNET
port connects to an individual network device, such as a PC or a laptop.
• The
INTERNET
port connects to your router or if you have no router, directly to your cable or
DSL broadband modem.
Note:
If you connect directly to a broadband modem, you must first configure your Cisco ATA to
act as a router. Please see the
Using your Cisco ATA as a Router section
.
• The
Power
port is where you connect your AC power adapter.
For further assistance
on activating your Cisco
sPa122 ata, contact 8x8
Customer support on
1.888.898.8733
