background image

Cisco SPA100 Series Analog Telephone Adapters

Mounting the ATA

You can place the ATA on a desktop or mount it on a wall.

C

AUTION

To prevent the ATA from overheating, do not operate it in an 
area that exceeds an ambient temperature of 104°F (40°C).

Desktop Placement

Place the ATA on a flat surface near an electrical outlet.

W

ARNING

Do not place anything on top of the ATA; excessive weight 
could damage it.

Wall Mounting

The ATA has two wall-mount slots on the bottom panel. To mount the ATA 
on a wall, you need mounting hardware (not included). Suggested 
hardware is illustrated (not true to scale).

Factory Reset of Unit

WARNING: 

All non-default 

settings will be lost. This 
includes network and service 
provider data.

73738

RESET

When prompted, press 1 to 
confirm, or press 

*

 (star) to 

cancel. After you hear “Option 
successful,” hang up the 
phone. The ATA reboots.

Reboot of Voice System

732668

REBOOT

After you hear “Option 
successful,” hang up the 
phone. The ATA reboots.

User Factory Reset of Unit

WARNING: 

All user-

changeable non-default 
settings will be lost. This may 
include network and service 
provider data.

877778

When prompted, press 1 to 
confirm, or press 

*

 (star) to 

cancel. After you hear “Option 
successful,” hang up the 
phone. The ATA reboots.

IVR Action

Menu 
Option

Choices and Instructions

5

Содержание SPA100 Series













Отзывы: