Cisco SM-X-NIM-ADPTR Скачать руководство пользователя страница 3

Connecting the Cisco Network Interface Module Adapter for SM-X Slot on the Cisco 4000 Seris Integrated Services 

3

Connecting the Cisco Network Interface Module Adapter for SM-X Slot on Cisco 4300 and 4400 Series Integrated Services Routers

Recommended Practices for the SM-X-NIM-ADPTR

This section describes recommended practices for safe and effective installation of the hardware 
described in this document.

Safety Recommendations, page 3

Preventing Electrostatic Discharge Damage, page 4

General Maintenance Guidelines, page 4

Safety Warnings, page 4

Safety warnings included in this section apply to the SM-X-NIM-ADPTRs that are used on the 
Cisco 4000 Series ISRs.

Safety Recommendations

To prevent hazardous conditions, follow these safety recommendations while working with this 
equipment: 

Keep tools away from walk areas where you or others could fall over them.

Do not wear loose clothing around the router. Fasten your tie or scarf and roll up your sleeves to 
prevent clothing from being caught in the chassis.

Wear safety glasses when working under any conditions that might be hazardous to your eyes.

Locate the emergency power-off switch in the room before you start working. If an electrical 
accident occurs, shut the power off.

Before working on the router, turn off the power and unplug the power cord. 

Disconnect all power sources before doing the following:

Installing or removing a router chassis

Working near power supplies

Do not work alone if potentially hazardous conditions exist. 

Always check that power is disconnected from a circuit.

Remove possible hazards from your work area, such as damp floors, ungrounded power extension 
cables, or missing safety grounds.

If an electrical accident occurs, proceed as follows:

Use caution; do not become a victim yourself.

Turn off power to the room using the emergency power-off switch.

Determine the condition of the victim and send another person to get medical aid or call for 
help.

Determine if the person needs rescue breathing or external cardiac compressions; then take 
appropriate action. 

Содержание SM-X-NIM-ADPTR











Отзывы: