Cisco SG100D-08 Unmanaged Gigabit Switch Quick Start Guide
6
S
TEP
3
Insert a screw into each hole, leaving a gap between the surface
and the base of the screw head of at least 0.1 inches (3 mm).
S
TEP
4
Place the unmanaged switch wall-mount slots over the screws and
slide the unmanaged switch down until the screws fit snugly into
the wall-mount slots.
S
TEP
5
Connect the unmanaged switch to the other devices, as described
in the
“Connecting the Equipment”
section.
Flat Surface Installation
To deploy the device on a desktop or other flat surface:
S
TEP
1
Place the unmanaged switch on a desktop near an AC power
source.
S
TEP
2
Connect the unmanaged switch to the other devices, as described
in the
“Connecting the Equipment”
section.
