Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
Features
●
Eight 10/100 switched RJ-45 ports deliver up to 200 Mbps of throughput per port
●
Two 10/100/1000 switched RJ-45/ mini Gigabit Interface Converter (mini-GBIC) combo
ports
●
PoE on the 10/100 ports supplies up to the IEEE 802.3af maximum: 15.4W per port for up
to four ports, or 7.5W per port on eight ports
●
5.6-Gbps nonblocking, store-and-forward switching mechanism
●
Simplified QoS management enabled by queuing techniques using 802.1p, Differentiated
Services (DiffServ), or type of service (ToS) traffic prioritization specifications
●
WebView management allows configuration and monitoring of the switch using a standard
web browser
●
Secure remote management of the switch via Secure Shell (SSH) and Secure Sockets
Layer (SSL) channel network protocols
●
802.1q-based VLANs enable segmentation of networks for improved performance and
security
●
Private VLAN Edge (PVE) simplifies network isolation for guest connections or autonomous
networks
●
Automatic configuration of VLANs across multiple switches through Generic VLAN
Registration Protocol (GVRP)/ Generic Attribute Registration Protocol (GARP)
●
Automatic medium dependent interface (MDI) and MDI crossover (MDI-X) detection
●
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth (up to 8x) and link redundancy with Link Aggregation Control Protocol
(LACP)
●
Enhanced rate-limiting capabilities, including back pressure to control the rate of data flow
into and out of a port
●
Provides multicast, broadcast, and flood control
●
Port mirroring for noninvasive monitoring of switch traffic
●
Jumbo frame support up to 1632 bytes
●
Supports Simple Network Management Protocol (SNMP) v1, v2c, and v3
●
Fully rack-mountable using included rack-mounting hardware
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SFE1000P 8-Port 10/100 Ethernet Switch.
Table 1.
Specifications for the Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE/Fanless
Specifications
Ports
●
8 RJ-45 connectors for 10BASE-T and 100BASE-TX
●
2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots
●
Console port
●
Auto MDI/MDI-X
●
Auto-negotiate/manual setting
Buttons
None
