Unmanaged Desktop Switch
4
N
OTE
If the uplink from one unmanaged, cascaded switch to another is
moved from one port to another port, it can take 30 to 60
seconds for full network operation to resume. This is normal and
expected behavior.
To connect the unmanaged desktop switch to a network device
, such
as a printer or workstation:
S
TEP
1
Connect the Ethernet cable (Cat5 or better recommended) to the
Ethernet port of a computer, printer, network storage, or other
network device.
S
TEP
2
Connect the other end of the network Ethernet cable to one of the
numbered unmanaged desktop switch Ethernet ports.
The LED of the port lights if the device connected is active.
S
TEP
3
Repeat
Step 1
and
Step 2
for each device you want to connect to
the unmanaged desktop switch.
S
TEP
4
Connect the power adapter to the switch and to a power source,
and move the power switch to the on position.
C
AUTION
Make sure you use the power adapter included with the
switch. Using a different power adapter might damage the
switch.