background image

Connecting the 8300HDC

To connect your 8300HDC to your entertainment devices, complete these steps.

Identify the additional

devices you will connect

to the 8300HDC and TV.

See pages 

9

 through

1

4

 and the related user

guides for more

information.

VCR

DVD

D-VCR

Determine if your TV

is HD or SD and

whether it is wide

screen (16:9) or

standard screen

(4:3). 

See page 

8

for more information.

Home Theater

4

3

16

9

or

Make the connections for your TV and VCR as follows:
• If you are using an HDTV, 

see page 

5

 and the connection diagrams at the end

of  this guide.

• If you are using an SDTV, 

see page 

5

 and the connection diagrams at the end

of  this guide.

• If you want to archive some programs to VCR tape, 

see pages 

5

 and the

connection diagrams at the end of this guide.

D

3

1

2

4

Plug the 8300HDC and the TV into an AC power source that is not controlled

by a switch.

5

Do not turn on the 8300HDC or TV yet.

POWER

6

It may take several minutes for the 8300HDC to receive the latest sof tware,

programming, and service information. Wait until you see one of the following displays

on the front panel of the 8300HDC that indicates that the update is complete:
• Current time

• Four dashes (- - - -)

Note

: If four dashes are displayed, you must call your cable service provider to get

the 8300HD authorized.

7

Set up your set-top for HDTV by completing the 

HD Setup Assistant

:

• Make sure the 8300HDC and the TV is 

On

.

•  Follow the on-screen instructions to complete the 

HD Setup Assistant

. Set up Widescreen

(16:9) or standard screen (4:3) depending upon your TV type. See page 8 for more

information on the aspect ratio.

 

                  • At the conclusion of the on-screen instructions, begin watching TV.

5

External SATA Drive

Other

4

Содержание Scientific Atlanta Explorer 8300HDC



















Отзывы: