4
Cisco Smart+Connected Controller 200 Reference Guide
OL-27357-01
Mounting the Cisco Controller 200 on a Wall
Figure 2
Mounting the Cisco Controller 200
Step 2
Use the four (4) screws (provided) to attach the mounting plate to the bottom of the Controller 200.
Ensure that the narrow end of the slots will be on top when the device is installed.
Step 3
Arrange the wires to fit in the wire channels on the mounting plate.
Step 4
Line the slots on the mounting plate up with the screws.
Step 5
Press the device onto the screws and slide down until the screws are in the narrow end of the slots.
1
Slots to horizontally mount the Controller 200
2
Holes for attaching the plate to the Controller 200
3
Slots to vertically mount the Controller 200
