9-7
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
OL-16479-01
Chapter 9 Managing Subscribers
Removing Subscribers and Templates
How to Export a Subscriber Template
Step 1
From the SCE(config if)# prompt, type
subscriber template export csv-file
filename
and press
Enter
.
Exports the subscriber template to the specified file.
Removing Subscribers and Templates
•
How to Remove a Specific Subscriber, page 9-7
•
How to Remove All Introduced Subscribers, page 9-8
•
How to Remove a Specific Anonymous Subscriber, page 9-8
•
How to Remove All Anonymous Subscriber Groups, page 9-8
•
How to Remove All Anonymous Subscribers, page 9-8
•
How to Remove All Subscriber Templates, page 9-9
•
How to Remove Subscribers by Device, page 9-9
Use the following commands to remove all subscribers, anonymous groups, or subscriber templates from
the system.
•
no subscriber all
•
no subscriber anonymous-group all
•
clear interface linecard subscriber anonymous
•
default subscriber template all
Use the following commands to remove a specific subscriber or anonymous group from the system.
•
no subscriber name
•
no subscriber anonymous-group name
These subscriber management commands are LineCard interface commands (with the exception of the
clear interface linecard subscriber anonymous
command, which is a Privileged Exec command).
Make sure that you are in LineCard Interface command mode, and that the SCE(config if)# prompt
appears in the command line.
How to Remove a Specific Subscriber
Options
The following option is available:
•
subscriber-name
— the name of the subscriber to be removed
Step 1
From the SCE(config if)# prompt, type
no subscriber name
subscriber-name
and press
Enter
.
Removes the specified subscriber.
