4-10
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-07
Chapter 4 Installation and Maintenance
Installing the SCE 2000 Platform
How to Mount the System to the Rack
When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the
rack.
Step 1
Make sure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are
engaged or that the rack is otherwise stabilized.
Step 2
Position the SCE 2000 so that the front end is closest to you, and lift it carefully to place it into the rack.
To prevent injury, avoid sudden twists or moves.
Step 3
Slide the SCE 2000 into the rack, pushing it back until the brackets (installed at the front of the SCE
2000) meet the mounting strips or posts on both sides of the rack.
A rack with both front and back posts will have the crossrail supports installed. Slide the SCE 2000 onto
these crossrails and push it all the way back (
).
Figure 4-9
Sliding the SCE Platform into the Rack
Step 4
While keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with
the holes on the rack or mounting strip (
).
LINK RX
Cisco SCE 20
00 Series
4xGBE
TX
RX
MM
TX
LINK RX TX
RX
MM
TX
LINK RX TX
RX
MM
TX
LINK RX TX
RX
MM
TX
GBE-1
SUB
LINE
NET
PWR B STAT
US
PWR A
BYPASS
10/100/
1000
LINK/
ACTIVE
10/100/
1000
LINK/
ACTIVE
GBE-2
SUB LINE/CA
SCADE NET
AUX
CONSOLE
MNG 2
MNG 1
LINK RX
Cisco SCE 2000
Series
4xGBE
TX
RX
MM
TX
LINK RX TX
RX
MM
TX
LINK RX TX
RX
MM
TX
LINK RX TX
RX
MM
TX
GBE-1
SUB
LINE
NET
PWR B STAT
US
PWR A
BYPASS
10/100/
1000
LINK/
ACTIVE
10/100/
1000
LINK/
ACTIVE
GBE-2
SUB LINE/CA
SCADE NET
AUX
CONSOLE
MNG 2
MNG 1
1
2
3
92781