SCP:
Note: In this example, the running configuration file in plaintext form is saved to the SCP
server with IP address 192.168.100.139 and credentials cisco and cisco12345 as the
username and password, respectively.
You should now have successfully backed up the configuration files from your switch to a
network server through the CLI.
Download Configuration Files
Step 1. Log in to the switch console. The default username and password is cisco/cisco. If
you have configured a new username or password, enter the credentials instead.
Note: The commands may vary depending on the exact model of your switch. In this
example, the SG300-28 switch is accessed through Telnet.
Step 2. To copy a configuration file from a specific source, enter the following:
SG350X#copy [src-url] [running-config | startup-config]
The parameters are:
src-url — The location URL of the source file to be copied. The predefined URL aliases can be
configured. The options are:
●
- tftp:// — Source URL (tftp://ip-address/filename) for a file on a TFTP network server from
which to download.
