background image

Cisco RV260W Router Quick Start Guide

7

 

S

TEP

4

Power on the WAN device and wait until the connection is active.

S

TEP

5

Connect the power adapter to the 12VDC port of this device.

C

AUTION

Use only the power adapter that is supplied with the device. 
Using a different power adapter could damage the device or 
cause the USB dongles to fail.

The power

 

switch is on by default. The power light on the front 

panel is solid green when the power adapter is connected 
properly and the device is finished booting.

S

TEP

6

Plug the other end of the adapter into an electrical outlet. Use the 
plug (supplied) specific to your country.

S

TEP

7

Continue with the instructions in the Using the Setup Wizard to 
configure the device.

Getting Started with the Configuration

To configure the router, you can either use Ethernet or wireless. 
Please follow these steps to access the Wizard and then the 

web-based configuration utility from your computer by Ethernet:

S

TEP

1

Ethernet: Power on the PC that you connected to the LAN port. Your 
PC becomes a DHCP client of the device and receives an IP 
address in the 192.168.1.xxx range.

Wireless: Search the wireless SSID "CiscoSB-Setup", and connect 
to this SSID with the passphrase "cisco123".

S

TEP

2

Locate the IP address of the router. The router IP address is 
192.168.1.1 by default. As well,

a.

The router can be accessed and managed by Cisco network 
tools and services including the Cisco FindIT Network 
Discovery Utility that enables you to automatically discover all 
supported Cisco devices in the same local network segment 
as your computer. You can get a snapshot view of each device 
or launch the product configuration utility to view and configure 
the settings. For more information, see 

www.cisco.com/go/

findit

.

b. The router is Bonjour-enabled and automatically broadcast 

their services and listen for services being advertised by other 
Bonjour-enabled devices. If you have a Bonjour-enabled 
browser, such as Microsoft Internet Explorer with a Bonjour 

4

Содержание RV260W













Отзывы: