
Configuring VPN
Configuring Site-to-Site IPsec VPN Advanced Parameters
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
102
6
c. In the
Pre-Shared Key
field, enter the key or password. Ensure that the
password does not contain double-quotes (“).
d. In the
Diffie-Hellman (DH) Group
field, specify the DH Group algorithm used
when exchanging a pre-shared key. The DH Group sets the strength of the
algorithm in bits. Ensure that the DH Group is configured identically on both
sides of the IKE policy.
e. In the SA-Lifetime field, enter the interval, in seconds, after which the Security
Association becomes invalid.
f.
To enable the
Dead Peer Detection
feature, check the
Enable
box. Dead Peer
Detection (DPD) is used to detect if the peer is alive. If the peer is detected as
dead, the device deletes the IPsec and IKE Security Association. If you enable
this feature, also enter these settings:
-
DPD Delay—
The interval, in seconds, between consecutive DPD R-U-
THERE messages. DPD R-U-THERE messages are sent only when the
IPsec traffic is idle.
-
DPD Timeout—
The maximum time that the device should wait to
receive a response to the DPD message before considering the peer to
be dead.
STEP 6
Click Save.
NOTE
If you have a VPN connection already configured, you cannot add another without
deleting the existing VPN connection.
Managing VPN Policies
NOTE
Before you create an Auto VPN Policy, ensure that you create the IKE policy based
on which you want to create the auto VPN policy.
To manage VPN policies:
STEP 1
Choose
VPN > Site-to-Site IPsec VPN > Advanced VPN Setup
. Click
Add Row
.
STEP 2
In the
Add / Edit VPN Policy Configuration
section:
a. In the
Policy Name
field, enter a unique name to identify the policy.
b. In the
Policy Type
field, choose one of the following options: