© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 4
Product Specifications
Table 1 lists the product specifications for the Cisco RV130.
Table 1.
Product Specifications
Specifications
Description
Standards
IEEE, 802.3, 802.3u, 802.1D, 802.1p, 802.1w (Rapid Spanning Tree), 802.1Q (VLAN),IPv4 (RFC 791), IPv6
(RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)
Ports
LAN, WAN, USB
Switch
Power button (on/off)
Buttons
Reset
Cabling type
Category 5e or better
LEDs
Power, VPN, USB, WAN, LAN (ports 1-4)
Operating system
Linux
Network
Network Protocols
● Dynamic Host Configuration Protocol (DHCP) server
● Point-to-Point Protocol over Ethernet (PPPoE)
● Point-to-Point Tunneling Protocol (PPTP)
● Layer 2 Tunneling Protocol (L2TP)
● DNS proxy
● DHCP relay agent
● IGMP Proxy and multicast forwarding
● Rapid Spanning Tree Protocol (RSTP)
● Dynamic Domain Name System (TZO, DynDNS, 3322.org, NOIP)
● Network Address Translation (NAT), Port Address Translation (PAT)
● One-to-One NAT
● Port management
● Port mirroring
● Software configurable DMZ to any LAN IP address
● Session Initiation Protocol (SIP) Application Layer Gateways (ALG)
LAN
Four (4) 10/100/1000 Mbps Gigabit LAN ports with managed switch
WAN
One (1) 10/100/1000 Mbps Gigabit WAN port
Routing Protocols
● Static routing
● Dynamic routing
● RIP v1 and v2
● Inter-VLAN routing
Network Address Translation
(NAT) Protocol
Port Address Translation (PAT), Network Address Port Translation (NAPT)
VLAN Support
Port-based and 802.1Q tag-based VLANs
Number of VLANs
5 active VLANs (3-4096 range)
IPv6
● Dual-stack IPv4 and IPv6
● 6to4 tunneling
● Stateless address auto-configuration
● DHCPv6 Server for IPv6 Clients on LAN
● DHCP v6 client for WAN connectivity
● Internet Control Message Protocol (ICMP) v6
● Static IPv6 Routing
● Dynamic IPv6 Routing with RIPng
Network Edge (DMZ)
Software configurable to any LAN IP address
Layer 2
802.1Q-based VLANs, 5 active VLANs
