xxx
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
OL-13644-01
About This Guide
Installation Warning Card
DOC-7812348=
Contains precautions that you should take before you
insert a card into a slot. This Warning Card ships with
product.
Regulatory Compliance and Safety Information for Cisco
Multiservice Switch Products (MGX, BPX, and SES)
DOC-7814790=
Provides regulatory compliance information, product
warnings, and safety recommendations for all the Cisco MGX
multiservice switches: MGX 8230, MGX 8250, MGX 8850
(PXM1), MGX 8850 (PXM45), MGX 8850 (PXM1E), MGX
8830 and MGX 8950. Also provides such information for the
MGX 8880 Media Gateway.
This book ships with product.
Table 4
Descriptions of Technical Manuals and Release Notes for Cisco Multiservice Switch Products
Document Title
Description
Cisco ATM and Frame Relay Services (MPSM-T3E3-155 and
MPSM-16-T1E1) Configuration Guide and Command
Reference for MGX Switches, Release 5.2
Provides software configuration procedures for provisioning
ATM and Frame Relay connections on the new
MPSM-T3E3-155 multiprotocol service module. Also
describes all MPSM-T3E3-155 commands.
Cisco ATM Services (AUSM/MPSM-8-T1E1) Configuration
Guide and Command Reference for MGX Switches, Release
5.2
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also describes all AUSM commands. Includes
software configuration procedures for provisioning
connections and managing the MPSM-8-T1E1 card as an
AUSM card replacement.
Cisco ATM Services (AXSM) Configuration Guide and
Command Reference for MGX Switches, Release 5.2
Explains how to configure the AXSM cards and provides a
command reference that describes the AXSM commands in
detail. The AXSM cards covered in this manual are the
AXSM-XG, AXSM/A, AXSM/B, AXSM-E, and
AXSM-32-T1E1-E.
Cisco Circuit Emulation Services (CESM/MPSM-8-T1E1)
Configuration Guide and Command Reference for MGX
Switches, Release 5.2
Provides software configuration procedures for provisioning
connections and managing the Circuit Emulation Service
Module (CESM) cards supported in this release. Also
describes all CESM commands. Includes software
configuration procedures for provisioning connections and
managing the MPSM-8-T1E1 card as a CESM card
replacement.
Cisco Frame Relay Services (FRSM/MPSM-8-T1E1)
Configuration Guide and Command Reference for MGX
Switches, Release 5.2
Provides software configuration procedures for provisioning
connections and managing the Frame Relay Service Module
(FRSM) cards supported in this release. Also describes all
FRSM commands. Includes software configuration
procedures for provisioning connections and managing the
MPSM-8-T1E1 card as an FRSM card replacement.
Cisco MGX 8230 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811215=
Provides installation instructions for the Cisco MGX 8230
edge concentrator.
Table 3
Documents that Ship with Multiservice Switch Products (continued)
Document Title
Description