1.
Ensure that the ejector levers of the PRE5 are at a fully-open position.
2.
Grasp the PRE5 and position it in the slot.
303382
303435
3.
Keep the ejector levers of the PRE5 at the fully-open position, without exerting
excessive force. Then slide the PRE5 into the slot, slowly.
4.
Slide the PRE5 into the slot until the ends of both ejector levers touch the front panel
surface of the chassis. Then, pivot both the ejector levers toward each other to firmly
seat the PRE5 in the backplane.
303383
361402
Chassis
front panel
surface
End of
ejector lever
