manualshive.com logo in svg

Cisco PA-2E3, Руководство по установке и настройке

Поделиться
Скачать
Cisco PA-2E3 Скачать руководство пользователя страница 46

3-2

PA-E3 Serial Port Adapter Installation and Configuration

OL-3502-04

Chapter 3      Removing and Installing Port Adapters

  Online Insertion and Removal

Figure 3-1

Handling a Port Adapter

Online Insertion and Removal

Several platforms support online insertion and removal (OIR) of port adapters; therefore, you do not 
have to power down routers when removing and replacing a PA-E3 or PA-2E3 in the Cisco 7100 series 
routers, Cisco 7200 series routers, Cisco 7200 VXR routers, Cisco uBR7200 series routers, Cisco 7201 
router, Cisco 7301 router, or Cisco 7401ASR router.

Although the Catalyst RSM/VIP2, FlexWAN module, Cisco 7304 PCI port adapter carrier card, and VIP 
support OIR, individual port adapters do not. To replace port adapters in the Catalyst 5000 switches, 
Catalyst 6000 switches, Cisco 7304 router, or Cisco 7000 or 7500 series routers, you must first remove 
the Catalyst RSM/VIP2, FlexWAN module, Cisco 7304 PCI port adapter carrier card, or VIP from the 
chassis and then install or replace port adapters as required. If a blank port adapter is installed on the 
Catalyst RSM/VIP2, FlexWAN module, Cisco 7304 PCI port adapter carrier card, or VIP on which you 
want to install a new port adapter, you must first remove the Catalyst RSM/VIP2, FlexWAN module, 
Cisco 7304 PCI port adapter carrier card, or VIP from the chassis, and then remove the blank 
port adapter.

Caution

To prevent system problems, do not remove port adapters from the Catalyst RSM/VIP2, FlexWAN 
module, Cisco 7304 PCI port adapter carrier card, or VIP or attempt to install other port adapters on the 
motherboard when the system is operating. To install or replace port adapters, first remove the 
Catalyst RSM/VIP2, FlexWAN module, Cisco 7304 PCI port adapter carrier card, or VIP from its 
interface processor slot.

It is wise to gracefully shut down the system before removing a port adapter that has active traffic moving 
through it. Removing a port adapter while traffic is flowing through the ports can cause system 
disruption. Once the port adapter is inserted, the ports can be brought back up.

Note

As you disengage the port adapter from the router or switch, OIR administratively shuts down all active 
interfaces in the port adapter.

OIR allows you to install and replace port adapters and service adapters (carrier cards, FlexWAN 
modules, and VIPs) while the router is operating; you do not need to notify the software or shut down 
the system power, although you should not run traffic through the port adapter you are removing while 
it is being removed. OIR is a method that is seamless to end users on the network, maintains all routing 
information, and preserves sessions.

H6420

Metal carrier

Printed circuit board

Содержание PA-2E3





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды