Cisco ONS 15327, Пользовательская документация

Страница: 78 / 559

1-28
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 1 Hardware Installation
Cable Description and Installation
Figure 1-19 Pins 1 and 8 on the RJ-45 connector
1.9.7 BITS Cable Installation
The BITS cables attach to the MICs using twisted-pair cables terminated with an RJ-45 connector on the
end that plugs into the BITS port. The other end of the cable plugs into the BITS clock. Terminate this
end of the cable according to local site practice.
Each MIC has one BITS input and one BITS output. The BITS inputs and outputs have corresponding
pins on the RJ-45 BITS ports. The BITS 1 inputs and outputs are on MIC A and the BITS 2 inputs and
outputs are on MIC B. See
Table 1-7 , Figure 1-20 , and Figure 1-21 when connecting BITS cables to the
ONS 15327.
Table 1-6 Alarm (External Control) Output Pin Assignments
Alarm Number (MIC A) Alarm Number (MIC B) RJ-45 Pin Number Function
2 1
7
8 Contact-
49564
Pin 1 Pin 8
Table 1-7 BITS Cable Pin Assignments
MIC A MIC B RJ-45 Pin Number Function
BITS 1 In BITS 2 In
3 BITS Input+
4 BITS Input-
BITS 1 Out BITS 2 Out
7 BITS
8 BITS Output-