Cisco ONS 15310-MA SDH, Руководство по процедурам

Страница: 539 / 632

18-39
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
78-19416-01
Chapter 18 DLPs H200 to H299
Step 3
Although Cisco does not recommend changing the LSP (Link State Protocol Data Unit) buffer sizes, you
can change the L1 LSP Buffer Size field to change the Level 1 link state PDU buffer size.
Step 4 Return to your originating procedure (NTP).
DLP-H236 Change Line and Threshold Settings for DS-3 Ports
Note
Refer to the “Network Element Defaults” appendix in the Cisco ONS 15310-MA SDH Reference Manual
for DS-3 port default settings.
Step 1
In node view, double-click the E1_21_E3_DS3_3, or E1_63_E3_DS3_3 card where you want to change
line or threshold settings.
Step 2 Click the Provisioning > DS-3 tabs.
Step 3
Depending on the setting you need to modify, click the Line , Line Thresholds , Elect Path Thresholds ,
or SDH Thresholds subtab.
Note
If you want to modify a threshold setting, it might be necessary to click the available directional,
type, and interval (15 Min, 1 Day) radio buttons and then click
Refresh . This will display the
desired threshold setting.
Step 4
Modify the settings found under these tabs by clicking in the field that you want to modify. In some
fields, you can choose an option from a drop-down list; in others you can type a value.
Step 5 Click Apply .
Step 6
Repeat Steps 4 and 5 for each subtab that has parameters you want to provision.
For definitions of the line settings, see Table 18-7 . For definitions of the line threshold settings, see
Table 18-8 on page 18-41 . For definitions of the electrical path threshold settings, see Table 18-9 on
page 18-42 . For definitions of the SDH threshold settings, see Table 18-10 on page 18-42 .
Table 18-7 describes the values on the Provisioning > Line tab for the DS-3 ports.
Purpose This task changes the line and threshold settings for DS-3 ports on the
E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards.
Tools/Equipment None
Prerequisite Procedures DLP-H29 Log into CTC, page 16-43
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher