Cisco ONS 15310-MA SDH Скачать руководство пользователя страница 423 | Manualshive

Страница: 423 / 632

Cisco ONS 15310-MA SDH Скачать руководство пользователя страница 423

17-17

Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2

78-19416-01

Chapter 17 DLPs H100 to H199

Step 8

In the Circuits window, verify that the circuit was correctly renamed.

Step 9

Return to your originating procedure (NTP).

DLP-H113 Change Active and Standby Span Color

Step 1

From the Edit menu in node view, choose

Preferences

.

Step 2

In the Preferences dialog box, click the

Circuit

tab.

Step 3

Complete one or more of the following steps, as required:

•

To change the color of the active (working) span, continue with

•

To change the color of the standby (protect) span, continue with

•

To return active and standby spans to their default colors, continue with

.

Step 4

As needed, change the color of the active span:

a.

In the Span Colors area, click the colored square next to Active.

b.

In the Pick a Color dialog box, click the color for the active span, or click the

Reset

button if you

want the active span to display the last applied (saved) color.

c.

Click

OK

to close the Pick a Color dialog box. If you want to change the standby span color,

continue with

. If not, click

OK

to save the change and close the Preferences dialog box, or

click

Apply

to save the change and keep the Preferences dialog box open.

Step 5

As needed, change the color of the standby span:

a.

In the Span Colors area, click the colored square next to Standby.

b.

In the Pick a Color dialog box, click the color for the standby span, or click the

Reset

button if you

want the standby span to display the last applied (saved) color.

c.

Click

OK

to save the change and close the Preferences dialog box, or click

Apply

to save the change

and keep the Preferences dialog box open.

Step 6

Return the active and standby spans to their default colors:

a.

From the Edit menu, choose

Preferences

.

b.

In the Preferences dialog box, click the

Circuits

tab.

c.

Click the

Reset to Defaults

button.

d.

Click

OK

to save the change and close the Preferences dialog box, or click

Apply

to save the change

and keep the Preferences dialog box open.

Purpose

This task changes the color of active (working) and standby (protect)
circuit spans on the detailed circuit map of the Edit Circuits window. By
default, working spans are green and protect spans are purple.

Tools/Equipment

None

Prerequisite Procedures

DLP-H29 Log into CTC, page 16-43

Required/As Needed

As needed

Onsite/Remote

Onsite or remote

Security Level

Provisioning or higher

«
...
421
422
423
424
425
...
»

Содержание ONS 15310-MA SDH

























































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов