Cisco NIM-ES2-4 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 13

background image

To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety, connect
the Cisco NIM-ES2-4 and Cisco NIM-ES2-8 only to intra-building or unexposed wiring or cable. The
intra-building port(s) of the equipment or subassembly must not be metallically connected to interfaces that
connect to the OSP or its wiring. These interfaces are designed for use as intra-building interfaces only (Type
2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP
cabling. The addition of Primary Protectors is not sufficient protection in order to connect these interfaces
metallically to OSP wiring. The intra-building cable must be shielded and the shield must be grounded at both
ends.

Danger

Related Documents

Document Title

Related Topic

Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch
Network Interface Module Configuration Guide for Cisco
4000 Series ISR

Configuration guide for the Cisco NIM-ES2-4
and Cisco NIM-ES2-8

Hardware Installation Guide for the Cisco 4000 Series
Integrated Services Router

Hardware installation instructions for service
modules

Software Configuration Guide for the Cisco 4000 Seris
Integrated Services Router

General information about configuration and the
command reference.

Regulatory Compliance and Safety Information for the
Cisco 4000 Series Integrated Services Router

Regulatory compliance information for the Cisco
4000 Series ISR.

Installing the Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Module

13

Installing the Cisco 4-Port and 8-Port Layer 2 Gigabit EtherSwitch Network Interface Module

Related Documents

«
...
11
12
13

Содержание NIM-ES2-4














Отзывы:

Нет отзывов

Похожие инструкции для NIM-ES2-4

Бренд: Barco Страницы: 6

S5800-EI Series

Бренд: H3C Страницы: 61

Temperature SWICHGAGE SPL

Бренд: Murphy Страницы: 4

Бренд: Waters Network Systems Страницы: 16

Бренд: protech Страницы: 4

Бренд: GE Страницы: 2

S5560S-EI Series

Бренд: H3C Страницы: 47

Бренд: FCI Страницы: 78

Бренд: GeoVision Страницы: 7

Бренд: SICK Страницы: 19

GlobeCaster STUDIO 4000

Бренд: Global Streams Страницы: 144

TNM4000-TP36FF4X16G24P

Бренд: MRD Страницы: 38

Бренд: Tripp Lite Страницы: 3

ControlCenter-IP-XS

Бренд: G&D Страницы: 56

Бренд: Cable Electronics Страницы: 12

Signal Distribution Box SDB45

Бренд: Audiovox Страницы: 12

Бренд: TRENDnet Страницы: 32

Бренд: Comnet Страницы: 105

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды