Cisco Nexus 93128TXNX, Руководство по установке оборудования

Страница: 13 / 76

M6PQ, M6PQ-E or M12PQ uplink module
(M12PQ uplink module shown). 6 Console port (RS232 port) 1
6- or 12-port 40-Gigabit Ethernet Quad Small
Form-Factor Plugable (QSFP+) optical ports for
connections to other devices (12-port uplink
module shown) 7 Chassis LEDs
• Beacon (BCN)
• Status (STS)
• Environment (ENV)
2
Notch in both sides of the chassis for locking the
power supply end of the chassis to the
bottom-support rails 8 Two USB ports used for saving or copying
functions
USB support is limited to USB 2.0
devices that use less than 2.5 W (less
than 0.5 A inclusive of surge current).
Devices, such as external hard drives,
that instantaneously draw more than 0.5
A are not supported.
Note
3
Screw holes (4) for attaching a center-mount rack
bracket for two-post racks (one bracket for each
of two sides) 9 Out-of-band management port (RJ-45 port) 4
Screw holes (2) for attaching a front-mount
bracket for four-post racks (one bracket on each
of two sides) 10 48 1- and 10-Gigabit Ethernet Small Form-Factor
Plugable (SFP+) optical ports (supporting
1-Gigabit and 10-Gigabit speeds) to switches or
Fabric Extenders (FEXs) 5
To determine which transceivers, adapters, and cables are supported by this switch, see the Cisco Transceiver
Modules Compatibility Information document.
The following figure shows the hardware features seen from the fan side of the chassis.
Cisco Nexus 9396PX NX-OS Mode Switch Hardware Installation Guide
3
Overview
Overview