manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 585 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 585

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-3

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring FC-SP and DHCHAP

DHCHAP

DHCHAP is a mandatory password-based, key-exchange authentication protocol that supports both 
switch-to-switch and host-to-switch authentication. DHCHAP negotiates hash algorithms and DH 
groups before performing authentication. It supports MD5 and SHA-1 algorithm-based authentication. 

To configure DHCHAP authentication using the local password database, perform this task:

Step 1

Enable DHCHAP.

Step 2

Identify and configure the DHCHAP authentication modes.

Step 3

Configure the hash algorithm and DH group.

Step 4

Configure the DHCHAP password for the local switch and other switches in the fabric.

Step 5

Configure the DHCHAP timeout value for reauthentication.

Step 6

Verify the DHCHAP configuration.

This section includes the following topics:

•

DHCHAP Compatibility with Fibre Channel Features, page 1-3

•

About Enabling DHCHAP, page 1-4

•

Enabling DHCHAP, page 1-4

•

About DHCHAP Authentication Modes, page 1-4

•

Configuring the DHCHAP Mode, page 1-5

•

About the DHCHAP Hash Algorithm, page 1-6

•

Configuring the DHCHAP Hash Algorithm, page 1-6

•

About the DHCHAP Group Settings, page 1-6

•

Configuring the DHCHAP Group Settings, page 1-6

•

About the DHCHAP Password, page 1-7

•

Configuring DHCHAP Passwords for the Local Switch, page 1-7

•

About Password Configuration for Remote Devices, page 1-8

•

Configuring DHCHAP Passwords for Remote Devices, page 1-8

•

About the DHCHAP Timeout Value, page 1-8

•

Configuring the DHCHAP Timeout Value, page 1-9

•

Configuring DHCHAP AAA Authentication, page 1-9

•

Displaying Protocol Security Information, page 1-9

DHCHAP Compatibility with Fibre Channel Features

This section identifies the impact of configuring the DHCHAP feature along with existing Cisco NX-OS 
features:

•

SAN port channel interfaces—If DHCHAP is enabled for ports belonging to a SAN port channel, 
DHCHAP authentication is performed at the physical interface level, not at the port channel level.

•

Port security or fabric binding—Fabric-binding policies are enforced based on identities 
authenticated by DHCHAP.

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов