manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 465 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 465

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-3

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Configuring VSAN Trunking

Configuring VSAN Trunking

Configuring VSAN Trunking

This section explains how to configure VSAN trunking and includes the following topics:

•

Guidelines and Restrictions, page 1-3

•

Enabling or Disabling the VSAN Trunking Protocol, page 1-3

•

About Trunk Mode, page 1-3

•

Configuring Trunk Mode, page 1-4

•

About Trunk-Allowed VSAN Lists, page 1-4

•

Configuring an Allowed-Active List of VSANs, page 1-6

Guidelines and Restrictions

When configuring VSAN trunking, note the following guidelines: 

•

We recommend that both ends of a VSAN trunking ISL belong to the same port VSAN. On platforms 
or fabric switches where the port VSANs are different, one end returns an error, and the other is not 
connected.

•

To avoid inconsistent configurations, disable all E ports with a 

shutdown

 command before enabling 

or disabling the VSAN trunking protocol.

Enabling or Disabling the VSAN Trunking Protocol

To enable or disable the VSAN trunking protocol, perform this task: 

About Trunk Mode

By default, trunk mode is enabled in all Fibre Channel interfaces. However, trunk mode configuration 
takes effect only in E-port mode. You can configure trunk mode as on (enabled), off (disabled), or auto 
(automatic). The default trunk mode is on. The trunk mode configurations at the two ends of the link 
determine the trunking state of the link and the port modes at both ends (see 

Table 1-1

).

Command

Purpose

Step 1

switch# 

configuration terminal

Enters configuration mode.

Step 2

switch(config)# 

no trunk protocol enable

switch(config)# 

Disables the trunking protocol.

switch(config)# 

trunk protocol enable

switch(config)#

Enables trunking protocol (default).

Table 1-1

Trunk Mode Status Between Switches

Your Trunk Mode Configuration

Resulting State and Port Mode 

Switch 1 

Switch 2 

Trunking State

Port Mode

On

Auto or on

Trunking (EISL)

TE port

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов