manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 393 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 393

C H A P T E R

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-1

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

1

Configuring Virtual Interfaces

This section describes the configuration of virtual interfaces on the Cisco Nexus 5000 Series switches. 
It includes the following sections:

•

Information About Virtual Interfaces, page 1-1

•

Guidelines and Limitations, page 1-1

•

Configuring Virtual Interfaces, page 1-2

•

Verifying Virtual Interface Information, page 1-4

Information About Virtual Interfaces

Cisco Nexus 5000 Series switches support Fibre Channel over Ethernet (FCoE), which allows Fibre 
Channel and Ethernet traffic to be carried on the same physical Ethernet connection between the switch 
and the servers. For additional information about FCoE, see 

Chapter 1, “Configuring FCoE.”

The Fibre Channel portion of FCoE is configured as a virtual Fibre Channel interface. Logical Fibre 
Channel features (such as interface mode) can be configured on virtual Fibre Channel interfaces. 

Note

Virtual interfaces are created with the administrative state set to down. You need to explicitly configure 
the administrative state to bring the virtual interface into operation.

Guidelines and Limitations

When configuring virtual interfaces, note the following guidelines and limitations:

•

Each virtual Fibre Channel interface must be bound to an FCoE-enabled Ethernet interface. FCoE 
is supported on 10-Gigabit Ethernet interfaces. 

•

Each virtual Fibre Channel interface is associated with only one VSAN. 

•

Any VSAN with associated virtual Fibre Channel interfaces must be mapped to a dedicated 
FCOE-enabled VLAN. 

•

FCoE is not supported on private VLANs. 

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов