manualshive.com logo in svg

Cisco Nexus 5000 Series, Руководство по настройке CLI, Страница: 28 / 660

Поделиться
Скачать
Cisco Nexus 5000 Series Скачать руководство пользователя страница 28

S e n d   f e e d b a c k   t o   n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

1-4

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

OL-16597-01

Chapter 1      Product Overview

Cisco Nexus 5000 Series Switch Software

The Nexus 5020 switch has 40 fixed 10-Gigabit Ethernet ports equipped with SFP+ interface adapters. 
The first 16 ports are switchable 1-Gigabit/10-Gigabit ports. Up to 12 additional 10-Gigabit Ethernet 
ports are available on the expansion modules. 

All of the 10-Gigabit Ethernet ports support FCoE. Each port can be used as a downlink (connected to a 
server) or as an uplink (to the data center LAN).

Fibre Channel Interfaces

Fibre Channel ports are optional on the Cisco Nexus 5000 Series switch. When using expansion modules 
up to eight Fibre Channel ports are available on the Nexus 5010 switch and up to sixteen Fibre Channel 
ports are available on the Nexus 5020 switch.

Each Fibre Channel port can be used as a downlink (connected to a server) or as an uplink (to the data 
center SAN fabric). 

Management Interfaces

A Cisco Nexus 5000 Series switch has two dedicated management interfaces (one serial console port and 
one 10/100/1000 Ethernet interface). 

Cisco Nexus 5000 Series Switch Software

The Cisco Nexus 5000 Series switch is a Layer 2 device, which runs the Cisco Nexus operating system 
(NX-OS). The Cisco Nexus 5000 Series switch software is described in the following topics:

•

Ethernet Switching, page 1-4

•

FCoE and Fibre Channel Switching, page 1-5

•

Licensing, page 1-5

•

QoS, page 1-5

•

Serviceability, page 1-5

•

Switch Management, page 1-6

•

Network Security Features, page 1-7

•

Virtual Device Contexts, page 1-7

Ethernet Switching

Cisco Nexus 5000 Series switches are designed to support high-density, high-performance Ethernet 
systems and provide the following Ethernet switching features: 

•

IEEE 802.1D-2004 Rapid and Multiple Spanning Tree Protocols (802.1w and 802.1s)

•

IEEE 802.1Q VLANs and trunks

•

IEEE 802.3ad link aggregation

•

Private VLANs

•

Traffic suppression (unicast, multicast, and broadcast)

Содержание Nexus 5000 Series





















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов