1-2
Cisco Nexus 4001I and 4005I Switch Module for IBM BladeCenter Hardware Installation Guide
OL-19951-03
Chapter 1 Product Overview
Hardware Features
•
Supported SFP Transceivers, page 1-6
External Interfaces
This section describes the external interfaces on the Switch Module and includes the following sections:
•
Location of Interfaces, page 1-2
•
Out-of-Band Management Port, page 1-2
•
External 10-Gigabit Ethernet Module Ports, page 1-3
•
Serial Console Port, page 1-3
Location of Interfaces
Figure 1-1
displays the Switch Module and the hardware interfaces, which are described in following
table.
Figure 1-1
Switch Module 4001I/4005I
Out-of-Band Management Port
The out-of-band management RJ45 port supports10/100/1000Base-T Ethernet. It can autonegotiate to
operate at any line speed (10, 100, 1000 Mbps); full and half duplex modes for 10 and 100 Mbps line
speed, and only full duplex at 1000 Mbps.
1-6
10 Gb Ethernet Small Form Factor
Pluggable (SFP+) ports
7, 10
Release latches
8
Out-of-band management port (labeled
Management)
9
Serial console port has RJ45 connector for
management console (labeled Console)
10 Gb Ether
net Switch Module
1
2
3
10
4
5
6
8
7
9
192853
