Cisco NCS 6000 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 52

Cisco NCS 6000 Скачать руководство пользователя страница 10

The drill hole template (Cisco product ID NC6-DRILLTEMP) is attached to the inside of the shipping
crate door. The drill hole template is the same for both the LCC and FCC.

•

Power components pallet:

Contains the power components, including the Power Modules (PMs). For

the FCC, a separate box ships that contains a power supply enclosure that includes the power trays and
the PCMs.

•

Primary card pallet:

Contains the fabric cards, line cards, and route processor cards. The FCC pallet

contains only fabric cards.

•

Cosmetics pallet:

Contains the default cosmetic components for the exterior of the chassis. This pallet

will also contain any optional cosmetic components for the exterior of the chassis, if ordered.

Chassis Specifications

The following table lists the physical specifications (dimensions and weight) for the Cisco NCS 6000 Series
Routers (as shipped and as installed without packaging).

Table 2: Cisco NCS 6000 Series Chassis Specifications

Cisco NCS 6000 Fabric Card Chassis

Cisco NCS 6008 Line Card Chassis

Physical Dimensions (Without Packaging)

76.60 in. (205.7 cm) as shipped

84.0 in. (213.4 cm) as installed with the power shelf

The FCC does not have a top cap.

81.0 in. (205.7 cm) as shipped

84.0 in. (213.4 cm) as installed with the

“

top cap

”

(The top cap in the cosmetics package attaches to
the top of the chassis)

Height

23.6 in. (59.9 cm)

23.6 in. (59.9 cm)

Width

39.0 in. (99.1 cm) without exterior cosmetics

42.0 in. (106.7 cm) with front and rear doors and
standard vertical cable troughs

39.0 in. (99.1 cm) without doors and other cosmetics

42.0 in. (106.7 cm) with front and rear doors and
standard vertical cable troughs

Depth

To install the FCC (front): 48 in. (122 cm)

To service FRUs (front): 31.7 in. (80.5 cm)

To service FRUs (rear): 14.0 in. (35.6 cm)

To install the LCC (front): 48 in. (122 cm)

To service FRUs (front): 31.7 in. (80.5 cm)

To service FRUs (rear): 14.0 in. (35.6 cm)

Aisle Spacing

Weight (Without Packaging)

708 lb (321 kg) chassis as shipped

925 lb (420 kg) chassis in shipping crate with pallet

1130 lb (513 kg) chassis fully loaded with power,
fan trays, cards, and cosmetics

775 lb (352 kg) chassis as shipped

1025 lb (466 kg) chassis in shipping crate with pallet

1450 lb (658 kg) chassis fully loaded with power,
fan trays, cards, and cosmetics

Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide

2

Overview

Chassis Specifications

«
...
8
9
10
11
12
...
»

Содержание NCS 6000





















































Отзывы:

Нет отзывов