Purpose
Command or Action
Binds the service instance to a bridge- domain instance
where
bridge-id
is the identifier for the bridge- domain
instance.
bridge-domain bridge-id
Example:
Device(config-if-srv)# bridge-domain 200
Step 6
Sets up a MAC address to be declared as a sticky MAC
address on the service instance.
mac security sticky address mac-address
Example:
Device(config-if-srv)# mac security sticky
address 1111.2222.3333
Step 7
Enables MAC security on the service instance.
mac security
Example:
Device(config-if-srv)# mac security
Step 8
Returns to user EXEC mode.
end
Example:
Device(config-if-srv)# end
Step 9
Displaying the MAC Security Status of a Specific Service Instance
Perform this task to display the MAC security status of a service instance.
SUMMARY STEPS
1.
enable
2.
show ethernet service instance id id
interface type
number
mac security
3.
end
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode.
enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Layer 2 Configuration Guide for Cisco NCS 4200 Series
58
Configuring MAC Address Security on Service Instances and EVC Port Channels
Displaying the MAC Security Status of a Specific Service Instance
