C H A P T E R
3
Transient Conditions
This chapter gives a description, entity, Simple Network Management Protocol (SNMP) number, and trap for
each commonly encountered transient condition.
Alarms can occur even in those cards that are not explicitly mentioned in the Alarm sections. When an alarm
is raised, refer to its clearing procedure.
•
Transients Indexed By Alphabetical Entry, on page 465
•
Trouble Notifications, on page 468
•
Transient Conditions, on page 469
Transients Indexed By Alphabetical Entry
alphabetically lists all transient conditions and their entity, SNMP number, and SNMP trap.
The Cisco Transport Controller (CTC) default alarm profile might contain conditions that are not currently
implemented but are reserved for future use.
Note
Table 17: Transient Condition Alphabetical Index
SNMP Trap
SNMP Number
Entity
Transient Condition
disableInactiveUser
5270
NE
disableInactiveClear
5280
NE
adminLockoutOfUser
5040
NE
adminLockoutClear
5050
NE
adminLogoutOfUser
5020
NE
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
465