3-20
Cisco MWR 1941-DC Mobile Wireless Edge Router Hardware Installation Guide
78-15827-06B0
Chapter 3 Installing the Router
What to Do After Installing the Hardware
Remove directory filename [/config/test-config]?
Delete slot0:/config/test-config? [confirm]
Removed dir slot0:/config/test-config
Router#
dir slot0:
Directory of slot0:/config/
No files in directory
128094208 bytes total (121630720 bytes free)
Enter a Directory and Determine the Current Directory
To enter a directory in CF memory, use the
cd
slot0:
/
directory
-
name
command. To determine which
directory you are in, use the
pwd
command.
The following example shows output for the following actions:
•
Entering the home directory of a CF memory card in an external slot (slot0:/)
•
Verifying that you are in the slot0:/ directory
Router#
cd slot0:
Router#
pwd
slot0:/
What to Do After Installing the Hardware
When you have installed the router hardware, see the
Cisco MWR 1941-DC
Software Configuration
Guide
for initial software configuration information.
