background image

9

Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R)

OL-6847-01

  Safety Instructions

Caution

We recommend you avoid installing wireless antennas in or near rack-mounted installations that include
networking equipment and computer servers whose radiated noise emissions can severely degrade radio
performance.

To extend the coaxial cable included with your antenna, we recomend a low-loss or ultra-low-loss
coaxial cable for installation flexibility without a significant loss in range. The following table lists
transmission loss information about low-loss and ultra-low-loss extension coaxial cables available
from Cisco.

Safety Instructions

Follow these safety precautions when installing your antenna.

Warning

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a
minimum of 7.9 inches (20 cm) or more from the body of all persons.

Statement 332

Plan your installation procedure carefully and completely before you begin.

If you are installing an antenna for the first time, for your own safety as well as that of others, seek
professional assistance. Consult your dealer, who can explain which mounting method to use for the
location where you intend to install the antenna.

Choose your installation site with safety as well as performance in mind. Remember that electric
power lines and telephone lines look alike. For your safety, assume that any line is an electric power
line until determined otherwise.

Call your local power company or building maintenance organization if you are unsure about cables
close to your intended mounting location.

If an accident or emergency occurs with the power lines, call for qualified emergency help
immediately.

When installing your antenna in any location, do not use a metal ladder. Do dress properly: shoes
with rubber soles and heels, rubber gloves, and a long sleeved shirt or jacket. When drilling
mounting holes, wear safety glasses.

Cisco Product Number

Cable Length

Transmission Loss

AIR-CAB020LL-R

20 ft (6 m)

2.4-GHz: 1.3 dBi

5-GHz: 2.5 dBi

AIR-CAB050LL-R

50 ft (15 m)

2.4-GHz: 3.3 dBi

5-GHz: 5.75 dBi

AIR-CAB100ULL-R

100 ft (30 m)

2.4-GHz: 4.4 dBi

5-GHz: 7.25 dBi

AIR-CAB150ULL-R

150 ft (46 m)

2.4-GHz: 6.6 dBi

5-GHz: 11 dBi

Содержание Multiband Wall-Mount Antenna AIR-ANTM5560P-R



















Отзывы: