Contained in the box
(
please note, cables may vary in colour)
IP Conference Phone (Cisco MPP 8832)
Set up instructions
Power over Ethernet
(PoE) Adaptor
USB-C Cable
Network Cable
(RJ45)
IP Conference Phone
(Cisco MPP 8832)
Connect IP conference phone to power over Ethernet (PoE) adaptor
Take the conference phone
D
out of the box. Then take USB-C cable
B
and
plug one end into the USB-C port at the top of the conference phone. Next,
plug the other end of the USB-C cable into the USB-C port on the Power over
Ethernet (PoE) adaptor .
Connect IP conference phone to the internet
Take network cable
C
and plug it into the NETWORK port on the Power over
Ethernet (PoE) adaptor
A
. Then plug the other end of the network cable into a
spare PoE port on your switch. If your switch supports PoE, the conference phone
will begin powering up.
1
2
A
C
B
D
A
cisco
C
C
Switch
Set up videos and user guides can be found here: vodafone.co.nz/vobextras
B
B
A
C
C
D
A
