Cisco MGX 8950, Предисловие

Страница: 4 / 12

xviii
Cisco MGX 8950 Hardware Installation Guide
Release 2.1, Part Number 78-11273-01 Rev. B0, March 2002
About this Guide
Related Documentation
Cisco MGX 8950 Release 2.1 Documentation
The product documentation for the installation and operation of the MGX 8950 Release 2.1 switch is
listed in
Table 4 .
SES PNNI Release 1.1 Documentation
The product documentation that contains information for the understanding, the installation, and the
operation of the Service Expansion Shelf (SES) PNNI Controller is listed in
Table 5 .
Table 4 Cisco MGX 8950 Switch Release 2.1 Documentation
Title Description
Cisco MGX 8950 Switch Hardware Installation Guide,
Release 2.1
DOC-7812564=
Describes how to install the MGX 8950 core switch. It explains
what the switch does, and covers site preparation, grounding,
safety, card installation, and cabling.
Cisco MGX 8850 and MGX 8950 Switch Command
Reference, Release 2.1
DOC-7812563=
Describes how to use the commands that are available in the CLI
of the MGX 8850 and MGX 8950 switches.
Cisco MGX 8850 and MGX 8950 SNMP Reference,
Release 2.1
DOC-7812562=
Provides information on all supported MIB objects, support
restrictions, traps, and alarms for the AXSM, PXM45, and RPM.
PNNI is also supported.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the
MGX 8850 and the MGX 8950 switches and the BPX 8600
switches. When connected to a PNNI network, each BPX 8600
series switch requires a SES
1
for PNNI route processing.
1. SES = Service Expansion Shelf
Cisco MGX Route Processor Module Installation and
Configuration Guide, Release 2.1
DOC-7812510=
Describes how to install and configure the MGX Route Processor
Module (RPM-PR) in the MGX 8850 and MGX 8950 Release 2.1
switch. Also provides site preparation, troubleshooting,
maintenance, cable and connector specifications, and basic IOS
configuration information.
Table 5 SES PNNI Controller Release 1.1 Documentation
Title Description
Cisco SES PNNI Controller Software Configuration Guide,
Release 1.1
DOC-7813539=
Describes how to configure, operate, and maintain the SES
PNNI Controller.
Cisco SES PNNI Controller Software Command Reference,
Release 1.1
DOC-7813541=
Provides a description of the commands used to configure and
operate the SES PNNI Controller.
Cisco MGX and SES PNNI Network Planning Guide
DOC-7813543=
Provides guidelines for planning a PNNI network that uses the
MGX 8850 and the MGX 8950 switches and the BPX 8600
switches. When connected to a PNNI network, each BPX 8600
series switch requires a SES for PNNI route processing.