Cisco MGX 8830, Руководство по настройке

Страница: 403 / 642

9-39
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 9 Switch Operating Procedures
Managing NCDP Clock Sources
Display All NCDP Ports on the Switch
Enter the dspncdpports command to display general details about all signaling ports for NCDP.
U1.8.PXM.a > dspncdpports
PortId Clock mode Clock Vpi Clock Vci Admin Cost Ncdp Vc
6:1.1:1 disable 0 34 10 down
6:1.1:2 disable 0 34 10 down
6:1.1:3 disable 0 34 10 down
Table 9-19 describes the objects displayed by the dspncdpports command.
Display An NCDP Port
Enter the dspncdpport <portid> command to display detailed information for a specified NCDP
signaling port. Replace <portid> with the port identifier in the format slot:bay.line:ifnum.
U1.8.PXM.a > dspncdpport 6:1.1:1
Network clock mode : disable
Ncdp Vc status : down
Network clock vpi : 0
Network clock vci : 34
Admin cost : 10
Service Category : sig
PCR : 250
SCR : 150
MBS : 100
Table 9-20 describes the objects displayed by the dspncdpport command.
Table 9-19 dspncdpports Command Objects
Parameter Description
PortId Port identifier in the format slot:bay.line:ifnum. Table 9-1 describes these
parameters.
Clock mode Displays whether NCDP is enabled or disabled on each port.
Clock VPI Displays the VPI of the signaling channel for each port.
Clock VCI Displays the VCI of the signaling channel for each port.
Admin Cost Displays the routing cost of the port.
NCDP VC Displays whether the Ncdp VC is up or down.
Table 9-20 dspncdpport Command Objects
Parameter Description
Network clock mode Displays whether NCDP is enabled or disabled on each port.
NCDP Vc status Displays whether the Ncdp VC is up or down.
Network clock VPI Displays the VPI of the signaling channel for each port.
Network clock VCI Displays the VCI of the signaling channel for each port.
Admin Cost Displays the routing cost of the port.
Service Category Displays the service category for the current NCDP port.