manualshive.com logo in svg

Cisco MEM-RSP-128M=, Руководство по установке и настройке

Поделиться
Скачать
Cisco MEM-RSP-128M= Скачать руководство пользователя страница 1

Corporate Headquarters:

Copyright © 2003 Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Route Switch Processor (RSP2)
Installation and Configuration Guide

Product Numbers: RSP2, RSP=, ROMMON-RSP2, MEM-RSP-8M=, MEM-RSP-16M=, MEM-RSP-24M=,
MEM-RSP-32M=, MEM-RSP-64M=, MEM-RSP-128M=, MEM-RSP-FLC8M=, MEM-RSP-FLC16M=,
MEM-RSP-FLC20M=, MEM-RSP-FLC32M=

Customer Order Number: DOC-782026=

This document describes the Route Switch Processor (RSP2), the default system processor for the
Cisco 7505, Cisco 7507 and Cisco 7513 routers.

Caution

We strongly recommend that you do not use the RSP2 in the Cisco 7507-MX, and Cisco 7513-MX
routers. The Cisco 7507-MX and Cisco 7513-MX routers ship by default with an RSP8.

The RSP2 supports the high system availability (HSA) feature, which allows two RSP2s, or an RSP4/4+
and an RSP2, to be used in a Cisco 7507 and Cisco 7513 routers. See the

“Configuring High System

Availability” section on page 23

 for more information on HSA.

The RSP2 also supports high availability (HA), a series of features that operates similarly to HSA, but
which further minimizes system downtime. (HSA is the system default.) For more information on HA,
see the

“Enabling High Availability Features” section on page 38

.

With HA or HSA enabled, the RSP2 supports online insertion and removal (OIR).

Document Contents

This document contains the following sections:

•

Related Documentation, page 2

•

Product Description, page 3

•

Installation Prerequisites, page 8

•

Connecting the Console Terminal, page 18

Содержание MEM-RSP-128M=

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды