Figure 4: NEBS Kit for 4-Post installation
Front rack-mount bracket
2.
NEBS air baffle
1.
For more information on how to install the switch, see the
Installing the Switch in a 4-Post Rack, on page 9
and
Installing the Switch into a 2-Post Rack, on page 13
Installing the Switch in a 4-Post Rack
To install the switch, you must attach the front and rear mounting brackets to the switch, install the slider rails
on the rear of the rack, slide the switch into the slider rails, and secure the switch to the front of the rack.
Typically, the front of the rack is the side that is easiest to access for maintenance.
Before you begin
• Inspect the switch shipment to ensure that you have everything you ordered.
• Make sure that the switch rack-mount kit includes the following parts:
• Front rack-mount brackets (2)
• Rear rack-mount brackets (2)
• Slider rails (2)
• M4 x 0.7 x 8-mm Phillips countersink screws (12)
Installing the Cisco MDS 9220i Switch
9
Installing the Cisco MDS 9220i Switch
Installing the Switch in a 4-Post Rack
