10
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Card for the Cisco uBR10012 Router
OL-2872-02
Safety Information and Warnings
Safety Information and Warnings
Following are safety guidelines that you should follow when working with any equipment that connects
to electrical power.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Electrical Equipment Guidelines
Follow these basic guidelines when working with any electrical equipment:
•
Before beginning any procedures requiring access to the chassis interior, locate the emergency
power-off switch for the room in which you are working.
•
Disconnect all power and external cables before moving a chassis.
•
Do not work alone when potentially hazardous conditions exist.
•
Never assume that power has been disconnected from a circuit; always check.
•
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
•
Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing safety grounds.
Preventing Electrostatic Discharge Damage
Electrostatic discharge (ESD) damage, which occurs when electronic cards or components are
improperly handled, can result in complete or intermittent failures. The AC-input power shelf and its AC
power modules contain a printed circuit card that is fixed in a metal carrier. Electromagnetic interference
(EMI) shielding and connectors are integral components of the carrier. Although the metal carrier helps
to protect the cards from ESD, use an antistatic strap each time you handle the modules.
Operating altitude
–197 to 13,123 ft (– 60 to 4000 m)
Cisco IOS software minimum
requirements
•
Cisco uBR10-LCP2-MC16C—Cisco IOS Release 12.2(4)XF or
a later release
•
Cisco uBR10-LCP2-MC16E—Cisco IOS Release 12.2(4)XF or
a later release
•
Cisco uBR10-LCP2-MC16S—Cisco IOS Release 12.2(8)BC2 or
a later release
1.
British Thermal Units
Table 5
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Line Card Specifications
Description
Specifications
