Attach your Meraki access point to the Meraki mount cradle by lining up the top edge of the AP with the top tab of the mount cradle. Since the cradle is already
mounted to MA-UMNT-MR-A3 universal mount, guide the AP towards the top tab and insert the top tab into the AP slot.
Then adjust your AP to guide the bottom slot into the cradle’s bottom tab until it clicks into place.
Once in place, the AP should be secured to the cradle by using one of the included screws in the cradle’s bottom tab.
4.
Run Ethernet cable(s) to LAN Access ports of your Meraki access point and connect into the appropriate LAN Access port(s). Note some Meraki APs
have 1x LAN port and some have 2x LAN ports. Secure the AP with a Torx security screw.
4
