Configuring Voice Services
Configuring Dial Plans
Cisco Small Business ATA Administration Guide
69
4
Syntax for the Interdigit Short Timer
•
SYNTAX 1:
S
:s,
(
dial plan
)
Use this syntax to apply the new setting to the entire dial plan within the
parentheses.
•
SYNTAX 2:
sequence
Ss
Use this syntax to apply the new setting to a particular dialing sequence.
s:
The number of seconds; if no number is entered after
S
, the default timer of 5
seconds applies.
Examples for the Interdigit Short Timer
•
Set the timer for the entire dial plan.
EXAMPLE:
S:6,
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx |
9,8,011xx. | 9,8,xx.|[1-8]xx)
S:6,
While entering a number with the phone off hook, a user can pause for up
to 15 seconds between digits before the Interdigit Short Timer expires. This
setting is especially helpful to users such as sales people, who are reading the
numbers from business cards and other printed materials while dialing.
•
Set an instant timer for a particular sequence within the dial plan.
EXAMPLE:
(9,8<:1408>[2-9]xxxxxx |
9,8,1[2-9]xxxxxxxxxS0
|
9,8,011xx. | 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0
With the timer set to 0, the call is transmitted automatically
when the user dials the final digit in the sequence.
