SGE2010/SGE2010P Administration Guide
39
System Configuration
Using the Console
TraceRoute IPv6
You can use the
TraceRoute IPv6
screen to run a trace route test for an IPv6 address.
To open the screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
5. Network Configuration
.
4. From the
Network Configuration
menu, select
4. Trace Router IPv6
.
To change the IP address:
1. Select
Edit
, and then enter the IPv6 address.
2. Press the
Esc
key to move the cursor to the
Action
list.
To begin the trace route test:
1. Select
Execute
to begin the test.
2. After the test is complete, the results of the test appear on the screen.
3. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
