Preparing for Installation 2-5
LightStream 100 ATM Switch Components
•
Center card (P-8X55-A)
•
Processor (PROC) card (FSB3523GX, P-8X0R)
•
Gateway Packet Assembler/Disassembler (GWPAD) card (P-8X86[002])
•
Fans (three units)
•
Power supply
•
Slot covers (16 units)
•
Shielded power cable (one unit)
The LINF card box contains the LINF card set (a LINF card and front panel with window):
•
STS-3c/STM-1 LINF card (P-8X79, P-8X0K)
•
Transparent Asynchronous Transmitter/Receiver Interface (TAXI) LINF card (P-8X31,
P-8X85)
Note
The quantity and type of cards depend on your system configuration.
LightStream 100 ATM Switch Components
References throughout this publication refer to the LightStream 100 ATM switch front and
rear panel layouts. Figure 2-1 shows the front panel layout, and Figure 2-2 shows the rear
panel layout. Figure 2-3 and Figure 2-4 show LightStream 100 switch internal views.
