Networking
Address Management
Cisco ISA500 Series Integrated Security Appliances Administration Guide
173
4
•
Verify:
Click
On
to enable the authentication, or click
Off
to disable it. The
security appliance will ignore incoming VRRP packets from routers that do
not have the same authentication configuration for a VRRP group. VRRP
supports the plaintext and IPsec-AH authentication schemes. Choose either
Pass or AH as the authentication scheme and specify the settings.
•
Virtual IP Address:
Enter the virtual IP address used for all backup virtual
routers in the same group.
•
Status:
Displays the status of VRRP verification.
STEP 4
Click
Save
to apply your settings.
Address Management
Use the Address Management page to manage the address and address group
objects. The security appliance is configured with a long list of common address
objects so that you can use to configure firewall rules, port forwarding rules, or
other features. See
Default Address Objects, page 426
Refer to the following topics:
•
Configuring Addresses, page 173
•
Configuring Address Groups, page 174
Configuring Addresses
STEP 1
Click
Networking > Address Management
.
STEP 2
In the
Address Objects
area, click
Add Address
to add a new address object.
Other options:
To edit an entry, click the
Edit
(pencil) icon. To delete an entry, click
the
Delete
(x) icon. To delete multiple entries, check them and click
Delete
. The
default address objects cannot be edited and deleted.
The Address Object - Add/Edit window opens.
STEP 3
Enter the following information:
•
Name:
Enter the name for the address object.
