Figure 4: Mounting Screw Slots
Mounting screw slots (6)
1
Replacing the SD Flash Memory Card
Follow these steps to replace the SD flash memory card:
Step 1
Locate the flash memory card slot on the cable-side of the router.
Step 2
Loosen the captive thumb screw. (Be careful not to cross-thread or over-tighten the thumb screw.)
Step 3
Pull the cover open, and pull the cover tab from the hinge.
Step 4
Gently push the flash memory card to eject it. Place it in an anti-static bag to protect it from static discharge.
Step 5
Push the replacement card into the slot, and press it firmly in place. The card is keyed so that you cannot insert it the
wrong way.
Step 6
Place the flash card slot cover tabs into the hinge.
Step 7
Close the cover, and hand-tighten the screw.
Installing and Connecting the Router
7
Installing and Connecting the Router
Replacing the SD Flash Memory Card
