Cisco IPS-4260 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 22

Cisco IPS-4260 Скачать руководство пользователя страница 18

6-18

Installing Cisco Intrusion Prevention System Appliances and Modules 5.1

OL-8677-01

Chapter 6 Installing IPS-4260

Removing and Replacing the Chassis Cover

Note

Removing the appliance chassis cover does not affect your Cisco warranty. Upgrading IPS-4260 does
not require any special tools and does not create any radio frequency leaks.

To remove and replace the chassis cover, follow these steps:

Step 1

Log in to the CLI.

Step 2

Prepare IPS-4260 to be powered off:

sensor#

reset powerdown

Wait for the power down message before continuing with Step 3.

Note

You can also power down IPS-4260 using IDM. For the procedure, refer to

Resetting the

Appliance

.

Step 3

Power off IPS-4260.

Step 4

Remove the power cord and other cables from IPS-4260.

Step 5

If rack-mounted, remove IPS-4260 from the rack.

For the procedure, see

Rack Mounting, page 6-9

.

Step 6

Place IPS-4260 in an ESD-controlled environment.

For more information, see

Working in an ESD Environment, page 1-25

.

Step 7

Press the blue button on the top of the chassis cover and slide the chassis cover back.

Caution

Do not operate IPS-4260 without the chassis cover installed. The chassis cover protects the internal
components, prevents electrical shorts, and provides proper air flow for cooling the electronic
components.

Step 8

To replace the chassis cover, position it at the back of the chassis and slide it on until it snaps into place.

Step 9

Reattach the power cord and other cables to IPS-4260.

For the procedure, see

Installing IPS-4260, page 6-14

.

153311

!

!

«
...
16
17
18
19
20
...
»

Содержание IPS-4260























Отзывы:

Нет отзывов