Cisco IP DECT 6823 Handset Quick Start Guide
1 |
P a g e
Your Handset
Legend
Indicator light (LED)
Headset port
Softkeys, phone control buttons (
Speaker
,
Menu
),
Navigation cluster (Navigation ring and
Select
button,
call control buttons (
Answer/Send
,
Power/End
)
Keypad
Volume
and
Mute
buttons
Turn On Your Handset
Press and hold
Power/End
until the screen turns on.
Turn Off Your
Handset
Press and hold
Power/End
until the screen turns off.
Lock the Handset Keypad
You can lock the handset keypad to stop accidental dialing.
When you lock the keypad, you can still dial emergency
numbers. The softkey label does not display when you lock
the keypad.
Press and hold
Zero (0)
until the message
“Press and hold 0” is displayed on the screen.
Unlock the Handset Keypad
You must unlock the handset keypad to make calls. You
can however, dial emergency numbers from the locked
keypad. When you unlock the keypad, the softkey labels
appear.
Press and hold
Zero (0)
until the message
“Press and hold 0” does not display on the screen.
Make a Call
1.
When your handset is idle, enter the phone number
with the keypad.
2.
Press Answer
/Send
or
Call softkey
.
Answer a Call
Press Answer
/Send
or
Answer
softkey.
Hold and Resume a Call
1.
From an active call, press
Hold
softkey.
2.
Press
Resume
softkey to pick the call back up.
Mute Your Call
1.
Press
Mute hard button
on side of handset.
2.
To unmute yourself, press
Mute
again.
Create a Conference Call
1.
From an active call, press
More softkey >
selec
t
Conference
option from menu and then press
Hold
softkey.
2.
Enter the coworker’s number and press
Answer/Send
or Call softkey
.
3.
Press
Conf
after the coworker answers.
Transfer a Call
1.
From an active call, press
More
softkey
>
use
Navigation Ring
to highlight
Transfer
option and select
it.
2.
Enter the coworker’s number and press
Answer/Send
or Call softkey
.
3.
Press
Transfer
after the first ring tone or after your
coworker answers.
