Cisco IP DECT 6800 Series Скачать руководство пользователя страница 89 | Manualshive

Страница: 89 / 96

background image

• Do not dispose of the battery pack in fire or water. The battery may explode if placed in a fire.

• Do not disassemble, crush, puncture, or incinerate the battery pack.

• Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash

the exposed area with soap and water. If the electrolyte has come in contact with the eye, flush the eye
with water for 15 minutes and seek medical attention.

• Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees

Celsius).

• Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees

Celsius).

• When discarding a battery pack, contact your local waste disposal provider regarding local restrictions

on the disposal or recycling of batteries.

Caution

To obtain a battery, contact your local dealer. Use only the batteries that have a Cisco part number.

Power Outage

The ability to access emergency service through the phone depends on the base stations being powered. If
there is an interruption in the power supply, Service and Emergency Calling Service dialing will not function
until power is restored. In the case of a power failure or disruption, you may need to reset or reconfigure
equipment before using the Service or Emergency Calling Service dialing.

Regulatory Domains

The radio frequency (RF) for the handset is controlled by the base station. The base station is configured for
a specific regulatory domain. If you use this system outside of the specific regulatory domain, the system will
not function properly, and you might violate local regulations.

Health-Care Environments

This product is not a medical device and uses an unlicensed frequency band that is susceptible to interference
from other devices or equipment.

External Devices Usage

The following information applies when you use external devices with the DECT handset.

Cisco recommends the use of good quality external devices (such as headsets) that are shielded against
unwanted radio frequency (RF) and audio frequency (AF) signals.

Depending on the quality of these devices and their proximity to other devices such as mobile phones or
two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or
more of the following actions:

• Move the external device away from the source of the RF or AF signals.

Cisco IP DECT 6800 Series User Guide

79

Product Safety and Security

Power Outage

«
...
87
88
89
90
91
...
»

Содержание IP DECT 6800 Series

































































































Отзывы:

Нет отзывов

Похожие инструкции для IP DECT 6800 Series

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды